Industrial Racking
Repair
Fast, safe response for damaged racking systems, throughout Quebec.
An intervention tailored to your reality
An impact or a bent component deserves a technical review before a bay goes back into service.
Forklift impacts, bent beams, damaged uprights, and missing components can compromise the normal operation of a racking system. The first priority is to limit exposure to risk and identify the real extent of the damage.
We help you document the situation, assess the affected components, and define a suitable response. The solution depends on the type of racking, its manufacturer, the severity of the damage, the load, and the available technical documents.
What our team can assess with you
Visual assessment of the area and identification of affected components
Securing or taking the area out of service depending on the situation observed
Replacement or repair of components according to a confirmed technical solution
Inspection of relevant beams, diagonals, pins, anchors, and protections
Prevention recommendations to reduce recurring impacts
Your next step
Spotted some damage?
Send photos, the location, and any information you have. We’ll help you clarify the next step.
Scope, timeline, and technical requirements are confirmed after assessing your project.
React in a structured way
Observed damage isn’t treated as a simple cosmetic flaw.
Avoid improvisation
Structural components should not be modified without proper validation.
Reduce future impacts
Protections, traffic flow, and handling practices are part of the discussion.
Intervention scenarios
Examples to help you picture it
These scenarios illustrate the situations we regularly assess. Each intervention is tailored to the system, the condition of the components, and your operations.
Illustrative example
Upright hit in an active aisle
Illustrative scenario: identifying an impact, isolating the bay, and planning a solution based on the configuration observed.
Illustrative example
Beams and pins needing correction
Illustrative scenario: reviewing the components of a racking section to determine the replacements or corrections required.
Illustrative example
Adding protections in an impact zone
Illustrative scenario: installing protective elements near forklift travel paths.
Our approach
A clear mandate, from assessment to completed work
Secure and document
Photograph the damage, remove the area from traffic if necessary, and note the affected components.
Assess the scope
The system, loads, damage, and available documents are reviewed.
Define the solution
A replacement, repair, or validation approach is proposed based on the facts observed.
Prevent recurrence
The conditions that contributed to the damage can be discussed: impacts, protections, traffic flow.
Preparing your request
The information that speeds up a useful assessment
You don’t need to have everything on hand. These details simply help us better understand your environment and guide you more quickly.
Recent photos of the damage from several angles
Brand or type of racking, if known
Number of levels and type of loads near the affected area
Information about forklift traffic in the aisle
Any notice, report, or document already received about the situation
Frequently asked questions
Answers before planning your project
Every warehouse is different. These answers will help you prepare a more complete request; an assessment will then confirm the scope of the work.
Let’s talk about your project
Get your situation assessed before resuming operations.
A clear description and a few photos help us better direct your repair request.